Australian Army F88 Manualidades

Contents • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Design details [ ] The Steyr AUG is a. It is a weapon with a conventional action that fires from a. It is designed as a family of rifles that could be quickly adapted to a wide variety of roles with the change of the barrel to a desired length and profile.

Watch the slide show to see what's in the latest Army News. To read it online, click here.

The AUG is a modular configuration rifle that employs a high level of polymer and advanced alloy components. It is chambered in cartridge and has the standard 1:9 that will stabilize both SS109/M855 and M193 rounds.

Some nations including Australia and New Zealand uses a version with a 1:7 twist optimized for the SS109 NATO round. The AUG A1, an improved variant of the AUG consists of six main assemblies: the, with integrated, and carrier,, stock and. The AUG has a cyclic rate of fire of around 680–750 rounds per minute (RPM). Operating mechanism [ ] The AUG has a that features 7 radial locking lugs and is unlocked by means of a pin on the bolt body and a recessed camming guide machined into the bolt carrier. The bolt carrier itself is guided by two guide rods brazed to it and these rods run inside steel bearings in the receiver. 3design Jewel Free Download there.

The guide rods are hollow and contain the return springs. The bolt also contains a claw extractor that forms the eighth locking lug and a spring-loaded 'bump'-type casing ejector.

The gas cylinder is offset to the right side of the barrel and works with one of the two guide rods. The AUG uses a short-stroke piston system where the right guide rod serves as the action rod, transmitting the rearward motion of the gas-driven piston to the bolt carrier. The left-hand rod provides retracting handle pressure when connected by the forward assist and can also be utilized as a reamer to remove fouling in the gas cylinder. The firearm uses a 3-position gas valve. The first setting, marked with a small dot, is used for normal operation. The second setting, illustrated with a large dot, indicates fouled conditions. The third, 'GR' closed position is used to launch (of the non-bullet trap type).

The AUG is hammer-fired and the firing mechanism is contained in the rear of the stock, near the butt, covered by a synthetic rubber shoulder plate. The hammer group is made entirely of plastics except for the springs and pins and is contained in an open-topped plastic box which lies between the magazine and the buttplate.

During firing the recoiling bolt group travels over the top of it, resetting the hammer. Since the trigger is located some distance away, it transmits its energy through a sear lever which passes by the side of the magazine. The firing pin is operated by a plastic hammer under pressure from a coil spring. The Steyr AUG's telescopic sight picture. Note the back-up iron sights on top of it.